Lanmark Controls Inc. is pleased to announce the addition of the WinLaseLAN
software package to the WinLase Suite. This new WinLase version supports
the Ethernet scan controllers now available from LanmarkControls and
Cambridge Technology.
More News
|
|
LEC-1 Embedded Scan Controller
Hardware
Features | Software Features
| Electrical Requirements
The LEC-1 product has been specifically
designed to function as a standalone or "embedded" controller
within laser scanning systems. This enables the customer to integrate
the card into the most suitable system location, wihtout having to rely
on installation in a PC.
Hardware
Features
- Dual processor architecture
- ARM processor to handle 10/100 Base-T Ethernet communication and system
software
- FPGA/SoC for on-board real-time processing of vectors and laser control
- Complete independent control over all laser output signals
- Direct jumper configurable analog outputs for 2- or 3-axis scanning
heads.
- Industry standard XY/2-100 protocol outputs for 2- or 3-axis scanning
heads
- 16-bit positional command resolution
- 10 micro-second minimum step period
- Software selectable laser signal polarity and timing - Requires no
jumpers
- 10/100 Ethernet port
- (1) 12-bit +1-10 VDC analog output channel for laser power control
- (1) 8-bit opto-isolated output port for laser power control
- (4) IN, (4) OUT opto-isolated ports for external equipment control
- (4) INTERLOCK opto-isolated input ports
- (2) USB host ports for peripheral I/O and/or FLASH disk access
- (1) RS-232 serial port for User Interface Pendant or peripheral I/O
- 32MB on-board FLASH storage for local jobs
- 127mm x 102mm x 32mm (5" x 4" x 1.25")
Software
Features
- Local control via LAN, RS-232 or USB ports using control API
- Local control via User Interface pendant
- Requires an Ethernet capable PC to download jobs
- Jobs created with WinLaseLAN running on PC
- Jobs can be uploaded from USB FLASH disk
- Locally stored jobs can be run without any connection to network
Electrical
Requirements
- +/- 15-24 VDC @ 300 mA
- +5 @ 200 mA
|
|
Back
to Controller Hardware page
Contact Us
