IO-EC1000 Interface Module

Back to I/O Modules page

Because the LEC-1 is a compact completely integrated controller system supporting many interface signals, it is necessary to use high-density connectors to provide access to those signals. An IO-EC1000 I/O module provides an off-the-shelf I/O connection solution. The I/O module is designed to expose most connectors that the user will use on the top side, and all the connectors that need to connect to the main board on the back side. There are two power connectors on the back side that are "user" connectors since they are intended to provide power to the user's galvos located inside a marker head. The following connectors are available:

Ethernet & USB

• Ethernet
• USB Port 0
• USB Port 1

Serial I/O

• Pendant Serial
• Laser Serial Control
• Diagnostics (Debug)

X Servo

• Direct analog out

Y Servo

• Direct analog out

Z Servo

• Direct analog out

Digital I/O 1

• Status
• Laser Control
• Mark on the fly
• XY/2-100

Digital I/O 2

• Status
• User Digital I/O
• Interlocks
• Laser Digital Data

Laser Analog Power

• Laser Control

Input Power

• Input Power
• X Servo Power
• Y Servo Power

Electrical Requirements

• +/- 15-24 VDC @ 300 mA
• +5 volts is internally generated to supply LEC-1

Back to I/O Modules page

Copyright © | All Rights Reserved | Lanmark Controls Inc. | Corporate | Contact Us | Home | +1 978 264 0200